Weidmüller 1002050000 PCB Terminal Block: Complete Technical Overview
The Weidmüller 1002050000 PCB terminal block, described as Weidmüller LL 5.08/24/90 3.2SN OR BX PCB terminal block, is a 24-pole connection component intended for direct industrial wire termination on a printed circuit board. It is a suitable choice for designers who need a high pole count, dependable mechanical retention, and a connection format that remains accessible during service and maintenance.
This version is part of the OMNIMATE Signal LL terminal family and uses a 5.08 mm pitch, a 90° conductor outlet, a 3.2 mm tinned solder pin, and a through-hole mounting concept. These features support structured industrial board design, especially where the terminal edge acts as the main field wiring interface.
Technical Summary of Weidmüller 1002050000
The Weidmüller 1002050000 printed circuit board terminal provides 24 poles and uses a clamping yoke screw connection. It supports conductors up to 6 mm² and is supplied in orange with box packaging. The published LL family electrical ratings are 500 V / 32.5 A under IEC and 300 V / 20 A under UL, with supported conductor sizes of 0.5 to 6 mm² or AWG 26 to AWG 12 depending on the standard and usage context.
With a 24-pole arrangement, this terminal is especially relevant for higher-density connection requirements on industrial boards. It gives engineers the option to manage a broad range of field circuits in one continuous terminal section, which can support cleaner schematics and simpler wiring architecture.
Why a 24-Pole PCB Terminal Block Matters
A 24-pole PCB terminal block is often used in complex electronic assemblies that need many termination points on a single board edge. This can include machine control electronics, energy monitoring systems, distributed I/O modules, process interface cards, and specialized controller boards. In these products, a single high-pole terminal block can reduce the need for additional connector fragmentation.
The Weidmüller 1002050000 wire-to-board terminal block is also useful from a mechanical layout perspective. Because conductors exit at 90°, cable routing can stay low and organized. In industrial cabinets where enclosure space is carefully allocated, that geometry can make the difference between a tidy installation and a difficult one.
Where the Weidmüller 1002050000 Fits Best
This terminal block is relevant for advanced automation devices, machine panels, test equipment, industrial communication support boards, power distribution interfaces, and retrofit electronics that need reliable PCB-mounted termination. It is particularly suitable when long-term serviceability is as important as the initial assembly process.
Typical search terms associated with this product include Weidmüller 1002050000 PCB terminal block, Weidmüller 1002050000 terminal block, 24 pole PCB terminal block, and Weidmüller 1002050000 wire-to-board terminal. These are highly relevant because technical buyers often search by brand, code, pole count, and terminal style all at once.
Engineering Considerations Before Use
When integrating the Weidmüller LL 5.08/24/90 3.2SN OR BX PCB terminal block, engineers should consider PCB edge space, conductor grouping, trace current density, and planned maintenance access. High-pole terminal strips can be extremely efficient, but they work best when the board design supports clear circuit grouping and easy identification.
Good documentation is essential as well. Because a 24-pole board terminal can serve many separate functions, thoughtful labeling helps prevent wiring mistakes during installation and makes future troubleshooting much faster.
FAQ: Weidmüller 1002050000 PCB Terminal Block
What is the Weidmüller 1002050000?
The Weidmüller 1002050000 is a 24-pole PCB terminal block for direct wire-to-board connections in industrial electronic assemblies.
What is the pitch of the Weidmüller 1002050000 PCB terminal block?
The pitch is 5.08 mm, a common industrial standard for PCB terminal blocks that balances wiring density and accessibility.
How are conductors connected to this terminal block?
Conductors are connected using a clamping yoke screw connection. This method is widely chosen in industrial applications because it offers secure mechanical retention and practical service handling.
What is the conductor outlet direction?
The outlet direction is 90°, meaning wires exit horizontally relative to the board. This can improve cable routing in compact control enclosures.
What are the electrical capabilities of the Weidmüller 1002050000?
Published family data lists IEC 500 V / 32.5 A and UL 300 V / 20 A, with conductor sizes up to 6 mm² or AWG 12, depending on standard and installation context.
Why is the 24-pole version useful in industrial design?
The 24-pole version allows a larger number of field connections to be handled in one terminal area. That can simplify board layout, reduce connector count, and support more organized installation and maintenance procedures.
For more information about Weidmüller, review the wider ecosystem of industrial connectivity products.