Weidmüller LL 5.08/08/90 3.2SN OR BX PCB Terminal Block
The Weidmüller LL 5.08/08/90 3.2SN OR BX PCB terminal block is intended for board-level wiring tasks in industrial electronics where a dependable screw-clamp connection, a practical 8-pole configuration, and efficient right-angle conductor routing are required. In equipment such as controllers, monitoring modules, interface boards, and building automation products, direct PCB terminal blocks remain highly valuable because they simplify the transition from field wiring to internal circuitry.
Product Overview
The Weidmüller LL 5.08/08/90 3.2SN OR BX is a PCB terminal block with a 5.08 mm pitch, 8 poles, and a 90-degree conductor outlet direction. It has 3.2 mm tinned solder pins, an orange housing, and uses a clamping yoke screw connection. These characteristics make it a practical component for industrial board assemblies that need secure wire termination with clear long-term serviceability.
Users looking for a Weidmüller LL 5.08/08/90 3.2SN OR BX PCB terminal block are often searching for an 8-pole PCB terminal, a 5.08 mm screw-clamp board terminal, or a Weidmüller industrial PCB terminal for organized field wiring. This product meets that need directly.
Technical Features
- Product type: PCB terminal block
- Pitch: 5.08 mm
- Number of poles: 8
- Conductor outlet direction: 90°
- Solder pin length: 3.2 mm
- Contact finish: tinned
- Housing colour: orange
- Connection method: clamping yoke connection
- Maximum clamping range: 6 mm²
- IEC rating: 500 V / 32.5 A / 0.5–6 mm²
- UL rating: 300 V / 20 A / AWG 26–12
- Packaging: Box
Why an 8-Pole PCB Terminal Is So Practical
An 8-pole layout is one of the most useful formats in industrial PCB terminal design because it gives engineers enough connection positions for grouped signals, control lines, reference conductors, or low-power distribution tasks without creating an oversized connection strip. The Weidmüller LL 5.08/08/90 3.2SN OR BX terminal block works well in systems that need moderate connection density with clear terminal organization.
This matters because balanced connector sizing improves board edge planning, reduces unused positions, and makes installation drawings easier to follow. In many industrial products, those benefits translate directly into better build quality and lower service complexity.
Connection Security and Layout Benefits
The clamping yoke screw connection provides reliable conductor retention and remains highly familiar in industrial maintenance environments. Installers can work with a known connection method, while service personnel benefit from straightforward access during inspections or replacements. The Weidmüller LL 5.08/08/90 3.2SN OR BX PCB terminal block therefore supports not only good initial assembly but also long-term usability.
The right-angle outlet direction keeps wires aligned with the PCB plane, which improves cable routing inside compact equipment. This often leads to better internal organization and less conductor stress compared with less suitable wire exit geometries.
Application Areas
This terminal block can be used in compact control systems, machine electronics, HVAC controls, industrial monitoring units, interface modules, and general OEM devices requiring direct PCB wiring. Its conductor capacity and current rating make it relevant beyond simple signal applications.
FAQ
What is the Weidmüller LL 5.08/08/90 3.2SN OR BX used for?
It is used for direct wire-to-PCB termination in industrial and electronic devices where eight connection points are needed.
Why is an 8-pole terminal block popular?
It offers a practical middle ground between compact size and useful connection capacity for many control and interface tasks.
Is this product suitable for industrial control boards?
Yes. Its ratings and connection style make it highly relevant for industrial control and interface electronics.
What is the advantage of a 90-degree outlet direction?
It helps keep wires parallel to the PCB, improving enclosure space usage and cable organization.
Can this terminal block support larger conductor sizes?
Yes. According to the published data, it supports up to 6 mm² under IEC conditions.
Where can I find more about this product family?
For more information about Weidmüller, related PCB terminal families are worth exploring.