Weidmüller 1001610000 BLF 5.08HC/10/90 Connector Guide
The Weidmüller 1001610000 BLF 5.08HC/10/90 female plug is designed for PCB connection systems that need a well-organized ten-pole pluggable interface without sacrificing usability. Once a connector reaches ten poles, the quality of its layout, wire entry geometry, and connection technology becomes even more important. Engineers need a solution that remains manageable in production and in the field. This product addresses that requirement very effectively.
According to the product data, the Weidmüller BLF 5.08HC/10/90 female plug is a female PCB plug-in connector with 5.08 mm pitch, 10 poles, 90° entry, and PUSH IN with actuator technology. It is listed with a maximum clamping range of 3.31 mm² and rated data of IEC 400 V / 24 A / 0.2–2.5 mm² and UL 300 V / 18.5 A / AWG 26–12.
What Type of Connector Is Weidmüller 1001610000?
The Weidmüller 1001610000 connector is the detachable cable-side element of a pluggable board interface. It is intended to mate with a compatible header mounted on the PCB. This arrangement offers strong advantages in products where maintenance, board replacement, or modular assembly are part of the overall design concept.
Instead of rewiring conductors directly at the PCB each time service is needed, technicians can disconnect the plug assembly more efficiently. That saves time, reduces handling complexity, and helps preserve an orderly wiring layout.
Why a 10-Pole Female Plug Is Practical
A Weidmüller BLF 5.08HC/10/90 10-pole connector can support a broad set of grouped wiring scenarios, from multi-channel control interfaces to combined power, signal, and communication layouts. In compact systems, using one ten-pole connector instead of several smaller units can simplify the board edge and make the end product easier to understand and service.
That is especially useful in automation devices, control boards, monitoring units, access systems, and building electronics where interface complexity must be managed without compromising usability.
5.08 mm Pitch and User-Friendly Wiring
The Weidmüller 1001610000 BLF 5.08HC/10/90 benefits from the long-established strengths of the 5.08 mm pitch platform. This pitch gives enough conductor spacing to remain comfortable for technicians, even as the number of poles increases. That matters because high pole count connectors can quickly become difficult to handle if the physical dimensions are too tight.
With 5.08 mm spacing, the connector preserves a strong balance between density and accessibility. It remains compact for the PCB designer while still practical for the person doing the wiring.
90° Entry and PUSH IN Technology
The right-angle wire entry of the Weidmüller BLF 5.08HC/10/90 SN OR BX supports side-directed cable routing, which often makes enclosure integration easier. In narrow housings or panel systems, this can help avoid conductor congestion and keep the wiring path visually cleaner.
PUSH IN with actuator technology adds further value by enabling quick and intuitive conductor insertion. In serial production or service environments, that helps improve consistency and reduce wiring time.
Application Perspective
The Weidmüller 1001610000 female plug is highly suitable for controller interfaces, modular automation equipment, compact machine electronics, building systems, and any PCB-based platform that needs a reliable 10-pole pluggable connection. It contributes to product modularity, service readiness, and wiring clarity.
For Weidmüller connectivity systems, it is useful to evaluate the correct matching header and enclosure routing concept alongside the connector itself.
FAQ
What is Weidmüller 1001610000?
It is a 10-pole female PCB plug-in connector with 5.08 mm pitch and 90-degree cable entry.
What is the advantage of ten poles?
Ten poles allow more complex grouped interfaces to be handled in one connector body, improving board-edge efficiency and wiring structure.
What ratings are listed for this part?
The product data lists IEC 400 V / 24 A / 0.2–2.5 mm² and UL 300 V / 18.5 A / AWG 26–12.
Why is 5.08 mm pitch still important for a 10-pole connector?
Because it keeps conductor spacing comfortable and helps the connector remain practical to wire and maintain.
What connection method does it use?
It uses PUSH IN with actuator technology for fast and reliable conductor insertion.
Where can this connector be applied?
It can be applied in controller boards, automation systems, building devices, and compact industrial electronics that need a pluggable ten-pole interface.