Omron YRD-10010030 Mounting Accessory: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron YRD-10010030 Mounting Accessory — rated at Passive — is designed to prevent such unplanned stops in critical applications like sensor mounting.
In a well-designed automation system, all components of the sensing layer must work in harmony. Omron’s Omron Sensor family is engineered to feed signals to relays and controllers from the same manufacturer.
Omron YRD-10010030 Overview
The Omron YRD-10010030 is a Mounting Accessory rated at Passive designed to reliably handle sensor mounting applications. Key engineering features include sensor/relay mounting accessory, various mounting options.
From a technical standpoint, the Omron YRD-10010030 offers sensor/relay mounting accessory, various mounting options. Supply voltage Passive delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron YRD-10010030. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Mounting Accessory |
| Operating Voltage | Passive |
| Key Features | Sensor/relay mounting accessory, various mounting options |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Various Omron products |
Typical Application Areas
The Omron YRD-10010030 Mounting Accessory is commonly specified for the following applications:
- Sensor mounting
- Relay mounting
- Panel organisation
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron YRD-10010030 is designed with exactly those conditions in mind.
Mounting and Commissioning
A few installation details make a tangible difference with the Omron YRD-10010030 Mounting Accessory. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron YRD-10010030 Mounting Accessory consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
How do I install the Omron YRD-10010030?
Mount the Omron YRD-10010030 Mounting Accessory using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron YRD-10010030?
As the Omron YRD-10010030 Mounting Accessory uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron YRD-10010030 sensitive to inductive loads?
The Omron YRD-10010030 Mounting Accessory includes short-circuit and overcurrent protection in its output circuit.
Is the Omron YRD-10010030 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron YRD-10010030 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.