Omron NS8-TV00-V2 Industrial Automation Component: Technical Guide and Application Manual
Control system design involves dozens of sensor choices, each one a small bet on reliability. The Omron NS8-TV00-V2 Industrial Automation Component is a safe bet — proven in industrial automation environmentswith operating voltage 12-24V DC.
Sensor selection rarely happens in isolation. Alongside this sensor, many integrators also evaluate other Omron Omron Sensor technologies — models using different detection principles.
Omron NS8-TV00-V2 Overview
The Omron NS8-TV00-V2 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron NS8-TV00-V2 offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron NS8-TV00-V2. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron NS8-TV00-V2 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron NS8-TV00-V2 is designed with exactly those conditions in mind.
Mounting and Commissioning
When mounting the Omron NS8-TV00-V2 Industrial Automation Component in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron NS8-TV00-V2 Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
How do I install the Omron NS8-TV00-V2?
Mount the Omron NS8-TV00-V2 Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron NS8-TV00-V2?
As the Omron NS8-TV00-V2 Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron NS8-TV00-V2 sensitive to inductive loads?
The Omron NS8-TV00-V2 Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron NS8-TV00-V2 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron NS8-TV00-V2 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.