Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron E6C3-CWZ5GH 300P/R 2M is a Industrial Automation Component thatoperates at 12-24V DC and stands out in industrial automation applications with field-tested reliability.
Sensor selection rarely happens in isolation. Alongside this sensor, many integrators also evaluate other Omron Omron Sensor technologies — models using different detection principles.
What Is the Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component?
The Omron E6C3-CWZ5GH 300P/R 2M is a Industrial Automation Component rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance, cable 2 m.
What separates this sensor from generic alternatives is in the details: omron quality assurance, cable 2 m. Operating at 12-24V DC, with 2 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E6C3-CWZ5GH 300P/R 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E6C3-CWZ5GH 300P/R 2M is designed with exactly those conditions in mind.
Installation Notes
The Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component follows standard industrial mounting practice. Before mounting, ensure the target surface is clean and free from metal debris. After mounting, test the signal output and verify that the LED indicator responds correctly.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What is the difference between the Omron E6C3-CWZ5GH 300P/R 2M and a mechanical limit switch?
The Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component performs contactless detection, meaning it requires no physical contact with the target. This means longer life and higher switching frequency.
How does temperature affect the Omron E6C3-CWZ5GH 300P/R 2M?
The Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component delivers reliable performance across its specified operating temperature range. At extreme temperatures, sensing distance may shorten.
Can multiple Omron E6C3-CWZ5GH 300P/R 2M sensors be mounted side by side?
Yes, but leave sufficient spacing between sensors to avoid mutual interference (crosstalk). The minimum spacing is stated in the datasheet.
Does the Omron E6C3-CWZ5GH 300P/R 2M have a test function?
The Omron E6C3-CWZ5GH 300P/R 2M Industrial Automation Component is equipped with an LED indicator, allowing you to visually monitor the sensor’s operating status.
What is the warranty period for the Omron E6C3-CWZ5GH 300P/R 2M?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors.