Omron PS-31 SUS304 300MM Industrial Automation Component: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The PS-31 SUS304 300MM Industrial Automation Componentwith supply voltage 12-24V DC, designed for industrial automation applications, built to run trouble-free for years.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
Omron PS-31 SUS304 300MM — Product Profile
The Omron PS-31 SUS304 300MM is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
In the field, omron quality assurance stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron PS-31 SUS304 300MM. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where This Product Fits
The Omron PS-31 SUS304 300MM Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron PS-31 SUS304 300MM is designed with exactly those conditions in mind.
Practical Installation Tips
A few installation details make a tangible difference with the Omron PS-31 SUS304 300MM Industrial Automation Component. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron PS-31 SUS304 300MM Industrial Automation Component makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
How do I install the Omron PS-31 SUS304 300MM?
Mount the Omron PS-31 SUS304 300MM Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron PS-31 SUS304 300MM?
As the Omron PS-31 SUS304 300MM Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron PS-31 SUS304 300MM sensitive to inductive loads?
The Omron PS-31 SUS304 300MM Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron PS-31 SUS304 300MM RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron PS-31 SUS304 300MM require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.