Omron 3Z4S-LE SV-1214V Industrial Automation Component: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron 3Z4S-LE SV-1214V is a Industrial Automation Component thatoperates at 12-24V DC and stands out in industrial automation applications with field-tested reliability.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
What Is the Omron 3Z4S-LE SV-1214V Industrial Automation Component?
The Omron 3Z4S-LE SV-1214V is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron 3Z4S-LE SV-1214V. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron 3Z4S-LE SV-1214V Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron 3Z4S-LE SV-1214V is designed with exactly those conditions in mind.
Installation Notes
When mounting the Omron 3Z4S-LE SV-1214V Industrial Automation Component in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron 3Z4S-LE SV-1214V Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
How do I install the Omron 3Z4S-LE SV-1214V?
Mount the Omron 3Z4S-LE SV-1214V Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron 3Z4S-LE SV-1214V?
As the Omron 3Z4S-LE SV-1214V Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron 3Z4S-LE SV-1214V sensitive to inductive loads?
The Omron 3Z4S-LE SV-1214V Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron 3Z4S-LE SV-1214V RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron 3Z4S-LE SV-1214V require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.