Omron R88A-CR1B025NF-E Industrial Automation Component: Technical Guide and Application Manual
When a machine must run continuously, sensor selection is not about saving a few pounds on the BOM — it is about selecting products that will not become a production problem. The Omron R88A-CR1B025NF-E Industrial Automation Component (12-24V DC) is designed precisely for that reality.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
About the Omron R88A-CR1B025NF-E Industrial Automation Component
The Omron R88A-CR1B025NF-E is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
The engineering case for the Omron R88A-CR1B025NF-E Industrial Automation Component rests on clear advantages: omron quality assurance. Voltage rating 12-24V DC, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron R88A-CR1B025NF-E. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Industry Use Cases
The Omron R88A-CR1B025NF-E Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron R88A-CR1B025NF-E is designed with exactly those conditions in mind.
Installation Checklist
Commissioning the Omron R88A-CR1B025NF-E Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron R88A-CR1B025NF-E: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The R88A-CR1B025NF-E Industrial Automation Component is a current embodiment of that engineering culture.
Frequently Asked Questions
What applications is the Omron R88A-CR1B025NF-E designed for?
The Omron R88A-CR1B025NF-E Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron R88A-CR1B025NF-E operate at?
The Omron R88A-CR1B025NF-E operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron R88A-CR1B025NF-E?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron R88A-CR1B025NF-E Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron R88A-CR1B025NF-E have?
The Omron R88A-CR1B025NF-E Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron R88A-CR1B025NF-E in Europe?
The Omron R88A-CR1B025NF-E Industrial Automation Component is available through Omron’s authorised European distributors.