Omron R88M-1M40030T-BS2 Industrial Automation Component: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron R88M-1M40030T-BS2 Industrial Automation Component — rated at 12-24V DC — is designed to prevent such unplanned stops in critical applications like industrial automation.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
Omron R88M-1M40030T-BS2 Overview
The Omron R88M-1M40030T-BS2 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron R88M-1M40030T-BS2 offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron R88M-1M40030T-BS2. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron R88M-1M40030T-BS2 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron R88M-1M40030T-BS2 is designed with exactly those conditions in mind.
Mounting and Commissioning
Commissioning the Omron R88M-1M40030T-BS2 Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron R88M-1M40030T-BS2 Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What applications is the Omron R88M-1M40030T-BS2 designed for?
The Omron R88M-1M40030T-BS2 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron R88M-1M40030T-BS2 operate at?
The Omron R88M-1M40030T-BS2 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron R88M-1M40030T-BS2?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron R88M-1M40030T-BS2 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron R88M-1M40030T-BS2 have?
The Omron R88M-1M40030T-BS2 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron R88M-1M40030T-BS2 in Europe?
The Omron R88M-1M40030T-BS2 Industrial Automation Component is available through Omron’s authorised European distributors.