Omron R88D-1SN20F-ECT Industrial Automation Component: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron R88D-1SN20F-ECT Industrial Automation Component for industrial automation applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
What Is the Omron R88D-1SN20F-ECT Industrial Automation Component?
The Omron R88D-1SN20F-ECT is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron R88D-1SN20F-ECT. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron R88D-1SN20F-ECT Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron R88D-1SN20F-ECT is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron R88D-1SN20F-ECT Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron R88D-1SN20F-ECT Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron R88D-1SN20F-ECT designed for?
The Omron R88D-1SN20F-ECT Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron R88D-1SN20F-ECT operate at?
The Omron R88D-1SN20F-ECT operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron R88D-1SN20F-ECT?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron R88D-1SN20F-ECT Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron R88D-1SN20F-ECT have?
The Omron R88D-1SN20F-ECT Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron R88D-1SN20F-ECT in Europe?
The Omron R88D-1SN20F-ECT Industrial Automation Component is available through Omron’s authorised European distributors.