Omron NX-SOH200 Industrial Automation Component: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron NX-SOH200 Industrial Automation Component — rated at 12-24V DC — is designed to prevent such unplanned stops in critical applications like industrial automation.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
Omron NX-SOH200 Overview
The Omron NX-SOH200 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron NX-SOH200 offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron NX-SOH200. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron NX-SOH200 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron NX-SOH200 is designed with exactly those conditions in mind.
Mounting and Commissioning
One practical aspect of working with sensors like the Omron NX-SOH200 Industrial Automation Component is mounting consistency. If you have installed another sensor from the same family, the process is identical — same bracket, same cable connection, same adjustment method.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron NX-SOH200 Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What is the difference between the Omron NX-SOH200 and a mechanical limit switch?
The Omron NX-SOH200 Industrial Automation Component performs contactless detection, meaning it requires no physical contact with the target. This means longer life and higher switching frequency.
How does temperature affect the Omron NX-SOH200?
The Omron NX-SOH200 Industrial Automation Component delivers reliable performance across its specified operating temperature range. At extreme temperatures, sensing distance may shorten.
Can multiple Omron NX-SOH200 sensors be mounted side by side?
Yes, but leave sufficient spacing between sensors to avoid mutual interference (crosstalk). The minimum spacing is stated in the datasheet.
Does the Omron NX-SOH200 have a test function?
The Omron NX-SOH200 Industrial Automation Component is equipped with an LED indicator, allowing you to visually monitor the sensor’s operating status.
What is the warranty period for the Omron NX-SOH200?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors.