Omron NX-TC2405 Industrial Automation Component: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The NX-TC2405 Industrial Automation Componentwith supply voltage 12-24V DC, designed for industrial automation applications, built to run trouble-free for years.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
Omron NX-TC2405 — Product Profile
The Omron NX-TC2405 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
In the field, omron quality assurance stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron NX-TC2405. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where This Product Fits
The Omron NX-TC2405 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron NX-TC2405 is designed with exactly those conditions in mind.
Practical Installation Tips
Commissioning the Omron NX-TC2405 Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron NX-TC2405 Industrial Automation Component makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron NX-TC2405 designed for?
The Omron NX-TC2405 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron NX-TC2405 operate at?
The Omron NX-TC2405 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron NX-TC2405?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron NX-TC2405 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron NX-TC2405 have?
The Omron NX-TC2405 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron NX-TC2405 in Europe?
The Omron NX-TC2405 Industrial Automation Component is available through Omron’s authorised European distributors.