Omron NX1W-CIF11 Industrial Automation Component: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron NX1W-CIF11 Industrial Automation Component for industrial automation applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
What Is the Omron NX1W-CIF11 Industrial Automation Component?
The Omron NX1W-CIF11 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron NX1W-CIF11. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron NX1W-CIF11 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron NX1W-CIF11 is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron NX1W-CIF11 Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron NX1W-CIF11 Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron NX1W-CIF11 designed for?
The Omron NX1W-CIF11 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron NX1W-CIF11 operate at?
The Omron NX1W-CIF11 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron NX1W-CIF11?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron NX1W-CIF11 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron NX1W-CIF11 have?
The Omron NX1W-CIF11 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron NX1W-CIF11 in Europe?
The Omron NX1W-CIF11 Industrial Automation Component is available through Omron’s authorised European distributors.