Omron Y92E-S12PP4A 5M Industrial Automation Component: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron Y92E-S12PP4A 5M Industrial Automation Component for industrial automation applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
What Is the Omron Y92E-S12PP4A 5M Industrial Automation Component?
The Omron Y92E-S12PP4A 5M is a Industrial Automation Component rated at 12-24V DC, with 5 m cable length, designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance, cable 5 m.
What separates this sensor from generic alternatives is in the details: omron quality assurance, cable 5 m. Operating at 12-24V DC, with 5 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron Y92E-S12PP4A 5M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Cable Length | 5 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 5 m |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron Y92E-S12PP4A 5M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron Y92E-S12PP4A 5M is designed with exactly those conditions in mind.
Installation Notes
A few installation details make a tangible difference with the Omron Y92E-S12PP4A 5M Industrial Automation Component. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron Y92E-S12PP4A 5M Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
How do I install the Omron Y92E-S12PP4A 5M?
Mount the Omron Y92E-S12PP4A 5M Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron Y92E-S12PP4A 5M?
As the Omron Y92E-S12PP4A 5M Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron Y92E-S12PP4A 5M sensitive to inductive loads?
The Omron Y92E-S12PP4A 5M Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron Y92E-S12PP4A 5M RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron Y92E-S12PP4A 5M require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.