Omron XS3F-LM8PVC3A2M Industrial Automation Component: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron XS3F-LM8PVC3A2M Industrial Automation Component — rated at 12-24V DC — is designed to prevent such unplanned stops in critical applications like industrial automation.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
Omron XS3F-LM8PVC3A2M Overview
The Omron XS3F-LM8PVC3A2M is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron XS3F-LM8PVC3A2M offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron XS3F-LM8PVC3A2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron XS3F-LM8PVC3A2M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron XS3F-LM8PVC3A2M is designed with exactly those conditions in mind.
Mounting and Commissioning
Commissioning the Omron XS3F-LM8PVC3A2M Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron XS3F-LM8PVC3A2M Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What applications is the Omron XS3F-LM8PVC3A2M designed for?
The Omron XS3F-LM8PVC3A2M Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron XS3F-LM8PVC3A2M operate at?
The Omron XS3F-LM8PVC3A2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron XS3F-LM8PVC3A2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron XS3F-LM8PVC3A2M Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron XS3F-LM8PVC3A2M have?
The Omron XS3F-LM8PVC3A2M Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron XS3F-LM8PVC3A2M in Europe?
The Omron XS3F-LM8PVC3A2M Industrial Automation Component is available through Omron’s authorised European distributors.