Omron E2B-M18KN16-M1-B2 Industrial Automation Component: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The E2B-M18KN16-M1-B2 Industrial Automation Componentwith supply voltage 12-24V DC, designed for industrial automation applications, built to run trouble-free for years.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
Omron E2B-M18KN16-M1-B2 — Product Profile
The Omron E2B-M18KN16-M1-B2 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
In the field, omron quality assurance stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E2B-M18KN16-M1-B2. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where This Product Fits
The Omron E2B-M18KN16-M1-B2 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2B-M18KN16-M1-B2 is designed with exactly those conditions in mind.
Practical Installation Tips
Commissioning the Omron E2B-M18KN16-M1-B2 Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E2B-M18KN16-M1-B2 Industrial Automation Component makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron E2B-M18KN16-M1-B2 designed for?
The Omron E2B-M18KN16-M1-B2 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron E2B-M18KN16-M1-B2 operate at?
The Omron E2B-M18KN16-M1-B2 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2B-M18KN16-M1-B2?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2B-M18KN16-M1-B2 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2B-M18KN16-M1-B2 have?
The Omron E2B-M18KN16-M1-B2 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2B-M18KN16-M1-B2 in Europe?
The Omron E2B-M18KN16-M1-B2 Industrial Automation Component is available through Omron’s authorised European distributors.