Omron E2E-X9C112-M1 Industrial Sensor: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron E2E-X9C112-M1 is a Industrial Sensor thatoperates at 12-24V DC and stands out in industrial detection applications with field-tested reliability.
Sensor selection rarely happens in isolation. Alongside this sensor, many integrators also evaluate other Omron Omron Sensor technologies — models using different detection principles.
What Is the Omron E2E-X9C112-M1 Industrial Sensor?
The Omron E2E-X9C112-M1 is a Industrial Sensor rated at 12-24V DC designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E2E-X9C112-M1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron E2E-X9C112-M1 Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-X9C112-M1 is designed with exactly those conditions in mind.
Installation Notes
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron E2E-X9C112-M1 Industrial Sensor requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E2E-X9C112-M1 Industrial Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E2E-X9C112-M1 designed for?
The Omron E2E-X9C112-M1 Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E2E-X9C112-M1 operate at?
The Omron E2E-X9C112-M1 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-X9C112-M1?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-X9C112-M1 Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-X9C112-M1 have?
The Omron E2E-X9C112-M1 Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-X9C112-M1 in Europe?
The Omron E2E-X9C112-M1 Industrial Sensor is available through Omron’s authorised European distributors.