Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor: Technical Guide and Application Manual
Control system design involves dozens of sensor choices, each one a small bet on reliability. The Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor is a safe bet — proven in metal target detection environmentswith operating voltage 12-24V DC.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
Omron E2E-X23B1TL30-M1 Overview
The Omron E2E-X23B1TL30-M1 is a Inductive Proximity Sensor rated at 12-24V DC designed to reliably handle metal target detection applications. Key engineering features include m12 body, 2 mm sensing distance, standard design, ip67.
From a technical standpoint, the Omron E2E-X23B1TL30-M1 offers m12 body, 2 mm sensing distance, standard design, ip67. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron E2E-X23B1TL30-M1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Inductive Proximity Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Output Current | 200 mA |
| Key Features | M12 body, 2 mm sensing distance, standard design, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket, cable extension |
Typical Application Areas
The Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor is commonly specified for the following applications:
- Metal target detection
- Position sensor
- General industrial automation
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-X23B1TL30-M1 is designed with exactly those conditions in mind.
Mounting and Commissioning
When mounting the Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
How do I install the Omron E2E-X23B1TL30-M1?
Mount the Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron E2E-X23B1TL30-M1?
As the Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron E2E-X23B1TL30-M1 sensitive to inductive loads?
The Omron E2E-X23B1TL30-M1 Inductive Proximity Sensor includes short-circuit and overcurrent protection in its output circuit.
Is the Omron E2E-X23B1TL30-M1 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron E2E-X23B1TL30-M1 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.