Omron E3FB-DN23 Industrial Sensor: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron E3FB-DN23 Industrial Sensor for industrial detection applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Sensor selection rarely happens in isolation. Alongside this sensor, many integrators also evaluate other Omron Omron Sensor technologies — models using different detection principles.
What Is the Omron E3FB-DN23 Industrial Sensor?
The Omron E3FB-DN23 is a Industrial Sensor rated at 12-24V DC designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E3FB-DN23. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron E3FB-DN23 Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3FB-DN23 is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron E3FB-DN23 Industrial Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E3FB-DN23 Industrial Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E3FB-DN23 designed for?
The Omron E3FB-DN23 Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E3FB-DN23 operate at?
The Omron E3FB-DN23 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3FB-DN23?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3FB-DN23 Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3FB-DN23 have?
The Omron E3FB-DN23 Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3FB-DN23 in Europe?
The Omron E3FB-DN23 Industrial Sensor is available through Omron’s authorised European distributors.