Omron EE-SX672-WR 1M Industrial Sensor: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron EE-SX672-WR 1M Industrial Sensor for industrial detection applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
What Is the Omron EE-SX672-WR 1M Industrial Sensor?
The Omron EE-SX672-WR 1M is a Industrial Sensor rated at 12-24V DC designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron EE-SX672-WR 1M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron EE-SX672-WR 1M Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron EE-SX672-WR 1M is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron EE-SX672-WR 1M Industrial Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron EE-SX672-WR 1M Industrial Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron EE-SX672-WR 1M designed for?
The Omron EE-SX672-WR 1M Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron EE-SX672-WR 1M operate at?
The Omron EE-SX672-WR 1M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron EE-SX672-WR 1M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron EE-SX672-WR 1M Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron EE-SX672-WR 1M have?
The Omron EE-SX672-WR 1M Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron EE-SX672-WR 1M in Europe?
The Omron EE-SX672-WR 1M Industrial Sensor is available through Omron’s authorised European distributors.