Omron E3T-SL24 2M Industrial Sensor: Technical Guide and Application Manual
When a machine must run continuously, sensor selection is not about saving a few pounds on the BOM — it is about selecting products that will not become a production problem. The Omron E3T-SL24 2M Industrial Sensor (12-24V DC) is designed precisely for that reality.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
About the Omron E3T-SL24 2M Industrial Sensor
The Omron E3T-SL24 2M is a Industrial Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance, cable 2 m.
The engineering case for the Omron E3T-SL24 2M Industrial Sensor rests on clear advantages: omron quality assurance, cable 2 m. Voltage rating 12-24V DC, factory-fitted 2 m cable, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron E3T-SL24 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Industry Use Cases
The Omron E3T-SL24 2M Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3T-SL24 2M is designed with exactly those conditions in mind.
Installation Checklist
Commissioning the Omron E3T-SL24 2M Industrial Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron E3T-SL24 2M: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The E3T-SL24 2M Industrial Sensor is a current embodiment of that engineering culture.
Frequently Asked Questions
What applications is the Omron E3T-SL24 2M designed for?
The Omron E3T-SL24 2M Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E3T-SL24 2M operate at?
The Omron E3T-SL24 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3T-SL24 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3T-SL24 2M Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3T-SL24 2M have?
The Omron E3T-SL24 2M Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3T-SL24 2M in Europe?
The Omron E3T-SL24 2M Industrial Sensor is available through Omron’s authorised European distributors.