Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply: Technical Guide, Applications and Installation
The Omron S8VK-T24024 is a 3-Phase Input DIN Rail Power Supply developed for engineers who understand that the cost of an unplanned stop far exceeds the cost of a quality component. Rated at 380–480V 3-phase → 24V DC, it addresses real challenges found in 3-phase industrial panels without overcomplicating installation or maintenance.
Omron’s product range extends well beyond relays and switches. The company’s Omron Sensor portfolio covers inductive, photoelectric, and capacitive detection technologies — often integrated into the same panel alongside units like this one, creating a fully cohesive control system.
Understanding the Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply
The Omron S8VK-T24024 is a 3-Phase Input DIN Rail Power Supply rated at 380–480V 3-phase → 24V DC, built to handle 3-phase industrial panels reliably over a long service life. Key engineering features include output: 240w at 24v dc, 3-phase input 380–480v ac, ce certified, and the unit mounts via din rail.
Technically, the Omron S8VK-T24024 delivers output: 240w at 24v dc, 3-phase input 380–480v ac, ce certified. Matching the 380–480V 3-phase → 24V DC control bus requires no extra hardware, which keeps commissioning time short and the panel design clean.
Core Specifications
The table below summarises the main technical parameters of the Omron S8VK-T24024. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | 3-Phase Input DIN Rail Power Supply |
| Coil / Operating Voltage | 380–480V 3-phase → 24V DC |
| Key Features | Output: 240W at 24V DC, 3-phase input 380–480V AC, CE certified |
| Mounting | DIN rail |
| Operating Temperature | -25 °C to +70 °C |
Application Scenarios
The Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply is commonly specified for the following applications:
- 3-phase industrial panels
- High-power plc systems
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron S8VK-T24024 is designed with exactly those conditions in mind.
Getting It Right at Installation
Commissioning the Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply is straightforward. Snap or screw it into position on the DIN rail, connect cables at the correct terminals, and confirm polarity where applicable. During the first powered test, verify that the indicator LED (where fitted) responds correctly and that the output contacts behave as expected under a controlled test load.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Why Engineers Choose Omron
Specifying the Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply also means specifying into an ecosystem. Omron’s portfolio covers relays, sensors, PLCs, power supplies, and more — all engineered to work together. When a component does eventually need replacing, compatibility with the rest of the system is guaranteed, which is something off-brand alternatives simply cannot offer.
Frequently Asked Questions
What applications is the Omron S8VK-T24024 designed for?
The Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply is designed primarily for 3-phase industrial panels, high-power PLC systems. Its construction and contact ratings make it well suited to both continuous-duty and intermittent switching in these environments.
What coil voltage does the Omron S8VK-T24024 use?
The Omron S8VK-T24024 operates at a coil voltage of 380–480V 3-phase → 24V DC. Always verify that your control circuit voltage matches before installation.
Does the Omron S8VK-T24024 require a specific socket?
Yes, Omron designs its relay families to work with specific matched sockets. Using a non-specified socket can affect contact pressure and shorten service life. Refer to the Omron S8VK-T24024 datasheet for the compatible socket model.
What certifications does the Omron S8VK-T24024 carry?
Omron products are manufactured to CE and UL standards, with additional certifications depending on the model. Product-specific certification details are available in the official Omron datasheet and on the product label.
Where can I source the Omron S8VK-T24024 in Europe?
The Omron S8VK-T24024 3-Phase Input DIN Rail Power Supply is available through Omron’s authorised European distributors. Purchasing through official channels ensures product authenticity, full warranty coverage, and access to technical support.