Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module: Technical Guide, Applications and Installation
Maintenance teams know the difference between components that merely survive and ones that genuinely perform over the long haul. The Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module— 24V AC/DC rated — falls firmly in the second category, making it a frequent first choice for PLC DC output isolation environments.
In a well-designed automation system, the sensing layer and the switching layer work in close coordination. Omron’s Omron Sensor range is engineered to feed signals directly into relays and controllers from the same manufacturer, minimising compatibility concerns and simplifying system validation.
Omron G3RV-SR500-D 24VAC/DC — Product Profile
The Omron G3RV-SR500-D 24VAC/DC is a DC SSR Socket Module rated at 24V AC/DC, built to handle PLC DC output isolation reliably over a long service life. Key engineering features include 24v dc control and load, slim socket module, and the unit mounts via din rail.
On the bench, 24v dc control and load, slim socket module stands out immediately. The 24V AC/DC rating align with the control voltage standards used across manufacturing, building automation, and process control industries, reducing the need for additional conversion stages.
Technical Data Summary
The table below summarises the main technical parameters of the Omron G3RV-SR500-D 24VAC/DC. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | DC SSR Socket Module |
| Coil / Operating Voltage | 24V AC/DC |
| Contacts / Channels | 1-channel DC |
| Contact Current | 0.5 A |
| Key Features | 24V DC control and load, slim socket module |
| Mounting | DIN rail |
| Mechanical Lifetime | Semiconductor |
| Operating Temperature | -25 °C to +55 °C |
Where This Product Fits
The Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module is commonly specified for the following applications:
- Plc dc output isolation
- I/o modules
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron G3RV-SR500-D 24VAC/DC is designed with exactly those conditions in mind.
Practical Installation Tips
When mounting the Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module in a panel, pay attention to three things: the socket or rail type must be the correct Omron-specified match; the terminal wiring must use appropriate cable gauge; and there must be enough vertical clearance to allow the unit to be removed for service without disturbing adjacent wiring. Getting these details right at installation saves considerable time later.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime, fewer replacement cycles, and lower maintenance labour costs add up to a clear advantage over the operational lifetime of a machine.
Frequently Asked Questions
How do I install the Omron G3RV-SR500-D 24VAC/DC?
Mount the Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module on a 35 mm DIN rail using the compatible socket or directly as specified. De-energise the circuit before installation, connect cables at the rated cross-section, and tighten terminal screws to the torque values stated in the datasheet.
What is the electrical lifespan of the Omron G3RV-SR500-D 24VAC/DC?
Electrical lifespan depends on switching frequency and load type. At rated resistive load, Omron relay products typically achieve several hundred thousand to over a million operations. The exact figure for the Omron G3RV-SR500-D 24VAC/DC is stated in its technical datasheet.
Can the Omron G3RV-SR500-D 24VAC/DC switch inductive loads?
Yes, but inductive loads reduce contact lifespan due to higher arc energy at switch-off. For frequent inductive switching with the Omron G3RV-SR500-D 24VAC/DC DC SSR Socket Module, a suppression device — such as a varistor or RC snubber — is recommended across the load.
Is the Omron G3RV-SR500-D 24VAC/DC RoHS compliant?
Omron products conform to the RoHS Directive requirements. Specific compliance documentation for the Omron G3RV-SR500-D 24VAC/DC can be requested from your authorised Omron distributor.
What should I check during periodic maintenance of the Omron G3RV-SR500-D 24VAC/DC?
Inspect contact surfaces for pitting or discolouration, check terminal screws for loosening (particularly in high-vibration environments), and verify that the housing shows no thermal discolouration. Replace the unit if any of these signs are present.